Car polishing matters

Nowadays, the first transparent paint of steam car paint surface, the process is exquisite, the nursing procedure is the same as the general paint: firstly grinding, removing the original defects of car paint, it is mainly used to remove oxidation, hair scratches, micro scratches, equivalent car paint damage. The type of abrasive is selected based on the same damage and the nature of the paint (transparent or general paint).

The polishing agent is mainly divided into a light-colored polishing agent and a dark polishing agent. As the name suggests, it is also a dark-colored car with a dark polishing agent, and a light-colored car with a light-colored polishing agent. The polishing agent acts as a strong cleaning agent before waxing or as a "detergent." After the car is "washed out of the face", it is necessary to layer a reducing agent, also called "sealant", which acts to restore the original appearance of the car paint.

Polishing process

Firstly, the vehicle is cleaned with a detergency strong paint cleaning agent to prevent the formation of new scratches in the grinding of the particulate dust. Secondly, there are defects such as coarse particles, fine sandpaper marks and flow marks on the coated surface, and 600 before polishing. #至1000# Water sandpaper 蘸 water bag in the rubber pad, it is quietly polished to level, pay attention to wear through the paint layer; then use the machine grinder to thicken the abrasive paste, coarsely grind the water sandpaper marks, add grinding The paste is polished and finely ground; the mechanical polishing machine is selected, and the mirror surface treatment agent is thrown to remove the coarse abrasive paste to leave the mark to reach the mirror surface polishing effect; after the polishing and polishing, the polishing polishing paste is wiped off, and the cotton yarn is used immediately. Polish the polished parts and wipe off the residual wax with dry cotton yarn to make the lacquer surface bright and bright.

If the paint finish is unsuccessful, you can take a newspaper and put it on the surface of the car paint. If you can read the report from the paint reflection, it will clarify that the car has a transparent paint and the surface is lubricated like a mirror. At the same time, you can also use a method to try your car to pass the heavy process to the perfect effect, you can use the cigarette case to wrap the transparent paper to conflict with the body, if the feeling is flat, it means the oxide layer is not removed, the middle of the simple abrasive Use, just use sandpaper instead of smoothing scratches.

Polishing is like human skin can regenerate, car paint can be regenerated, the original car paint layer, after being polished twice, will become thinner and thinner, and the self-protection ability is getting worse and worse, eventually leading to reversible aging. Therefore, unless it has been done, polishing should be done or done as much as possible, and after the secondary polishing, it requires careful and careful maintenance.